1. Clover Bootloader High Sierra 10.13.6
  2. Clover Bootloader Sierra Legacy

Nov 01, 2017 Update: I created a High Sierra USB stick bootloader with Unibeast and I can boot into High Sierra from there. When loaded from USB stick Clover shows me all HS partitions. But when I copy all files from the USB stick to the EFI folder on the APFS partition of my SSD drive, it still doesn't give me the option to boot into High Sierra. Dell M6800 High Sierra Helpful Kext. Attached is my Clover Bootloader Folder and the KEXT drivers I used to install and run macOS High Sierra on my Dell M6800 with NVIDIA Quadro K3100M 4GB GFX Card. I have 12GB of DDR3 1600MHz Ram installed in 3 separate Banks/DIMM slots. You are not logged in. To discriminate your posts from the rest, you need to pick a nickname. (The uniqueness of nickname is not reserved. It is possible that someone else could use the exactly same nickname. Begin the log from revision 857. It is release version. added large resolution support inside boot file if legacy boot, and with extra CsmVideoDxe.efi in the case of UEFI boot. support for native resolution depends on monitor EDID - folders restructure Revision 905 - implemented VideoBIOS multipatch. Note: MacUpdate team strongly suggests against installing Clover EFI on your main machine. Proper configuration requires additional research. Clover EFI Bootloader for macOS, Windows and Linux in UEFI and in legacy mode. Boot macOS, Windows, and Linux in UEFI or legacy mode on Mac or PC with UEFI or BIOS firmware.

Clover Boot Disk includes tools to help you create a USB install MacOS Sierra on Windows. You can create a USB install MacOS on just a few clicks.

Download:

  1. PartIMGMapper.exe
  2. Clover.img
    This is a partition image of Clover.
  3. OSX_10.12.5_Installer.hfs
    This is a partition image of MacOS Sierra installer.

Download all the files at OneDrive.

Creating a USB install MacOS

Clover Bootloader SierraClover bootloader sierra update
  1. Format USB to NTFS.
    1. Because the image of the install MacOS partition size larger than 4GB, you can not contain it on a FAT32 partition.
    2. If you are using NTFS partitions, skip this step.‚Äč
  2. Copy the two files Clover.img and OSX_10.12.5_Installer.hfs to the NTFS partition above. You will need a USB least 8GB to store these files.
  3. Running PartIMGMapper.exe and select the following:
    1. Select OSX_10.12.5_Installer.hfs at 2, Type is HFS/HFS+.
    2. Check Clover to enable booting Clover in Legacy BIOS mode.
    3. Note: If an error occurs when selecting the file, please defrag for the file first and then try again.
  4. After clicking the MAP button, the tool will set up the new partition on the USB and create a backup file with the .MBR extension.
  5. If you want to restore USB as before, run PartIMGMapper.exe, click on UNMAP and select the previously .MBR file that was backed up.
Now you will see the Clover partition, you can copy KEXT to the /EFI/CLOVER/kexts/Other directory and edit the Clover configuration in /EFI/CLOVER/config.plist.
Links
  • Read and write HFS+ on Ubuntu Linux.

Edited by nguyentu, 19 May 2017 - 11:26 PM.

Note: MacUpdate team strongly suggests against installing Clover EFI on your main machine. Proper configuration requires additional research.

Clover bootloader sierra 10.12.6

Clover Bootloader High Sierra 10.13.6

Clover EFI Bootloader for macOS, Windows and Linux in UEFI and in legacy mode

Features
Configurator

Clover Bootloader Sierra Legacy

  • Boot macOS, Windows, and Linux in UEFI or legacy mode on Mac or PC with UEFI or BIOS firmware
  • Boot using UEFI firmware directly or CloverEFI UEFI firmware emulation
  • Customizable GUI including themes, icons, fonts, background images, animations, and mouse pointers.
  • Theme manager and theme repository
  • Native screen resolution in GUI
  • Press Page Up or Page Down to change GUI resolution
  • Press F1 for multilingual help, depending on language setting in configuration
  • Press F2 to save preboot.log from GUI
  • Press F4 to save original (OEM) ACPI tables into /EFI/CLOVER/ACPI/origin
  • Press F5 to test DSDT patching
  • Press F6 to save graphics firmware into /EFI/CLOVER/misc
  • Press F10 to save screenshots from GUI
  • Press F12 to eject CD/DVD
  • GUI refreshes after CD/DVD insertion
  • Ability to boot previously selected boot entry after default timeout
  • Boot entries menu scrolls if screen resolution is too low for menu
  • Create custom boot entries for personalizing boot entries and add support for other operating systems
  • Create Clover boot entry in NVRAM with tool from GUI
  • Launch EFI command shell from GUI
  • Startup sound controlled by F8 and checked by F7