1. Can You Create A Windows Bootable Usb On Mac
  2. Create Mac Bootable Usb From Windows Madwithmac File
  3. Mac Bootable Usb Creation Tool

How can I make a bootable Windows installation USB on Mac OS X? After upgrading to macOS Mojave, you may find that Boot Camp Assistant is no longer supported and thus creating a bootable USB turns out to be a little bit challenging. In this tutorial we’ll show you how to create Windows 10 bootable USB from ISO on Mac, by using the Terminal or third-party software like UNetbottin.

Plug the USB Drive in to your Mac and open “Disk Utility” (found under applications / utilities in finder) Select the USB Drive. Select the Erase tab. Ensure that the format is Mac OS Extended (Journaled) IMPORTANT – Leave the name as “Untitled”. If you change this the next step won’t work. Create the Bootable Mavericks USB Drive. You will see output like this (note - your Mac's terminal may be black text on a white background if you haven't customized it). Copy the text I point to here. It will probably be something like /dev/disk2. Step 4: Format your USB Drive to work with Windows. Next format your USB drive to Windows FAT32 format. I am new to Mac and got stuck by this problem. My mon's PC was broken and needs a fresh install. Pls recommend an app to let me easily create windows 10 bootable usb. P.s Rufus and Windows Media Creation Tool are the two favorite when I am on PC. Re-Titled by Moderator.

Method 1: Create Windows 10 Bootable USB on Mac Using UNetbottin

UNetbootin is a free, open source utility that allows you to create bootable USB drives on Windows, Linux, and Mac OS X. If you’ve downloaded Windows 10 ISO image, here is how you can create a bootable Windows installer USB on Mac using UNetbootin.

  1. Plug a USB drive into your Mac and open Disk Utility. Select your USB drive from the left panel and click on Info button. Note down the device name since we will need that later.
  2. Next, download and launch the UNetbottin utility. Select the “Diskimage” radio button, click “” to select a bootable ISO image.
  3. After locating your Windows 10 ISO file, click on Open.
  4. Choose Type as USB Drive and select the device name of your USB drive (you probably would’ve noted it down earlier, so refer to that). Click OK to start installing to the USB drive.
  5. This process takes several minutes or longer, depending on the size of your selected ISO image.

Method 2: Create Windows 10 Bootable USB on Mac Using Terminal

Of course, if you prefer not to use third-party software, you can still use the excellent Terminal app, which is a little bit more involved, but no additional software needs to be installed. Follow these steps:

  1. After connecting a USB drive to your Mac, open a Terminal window and type diskutil list to display all the disks attached to your machine. You have to figure out the disk identifier of the USB drive you need to format. In my example, my USB drive is mounted as “disk2” and it’s about 32GB.
  2. Next, run the following command to format your USB drive and name it “WIN10“, where # is a placeholder for the disk identifier of your USB drive.
    diskutil eraseDisk MS-DOS 'WIN10' GPT disk#
  3. Now, mount your Windows 10 ISO image with the command below, assuming it’s saved the Downloads folder. In my case, it is mounted as a volume named “ESD-ISO“.
    hdiutil mount ~/Downloads/your_windows_10_image.iso
  4. Finally, run the following command to copy all the files from the mounted ISO to your USB drive.
    cp -rp /Volumes/ESD-ISO/* /Volumes/WIN10/

    This command will take a while, and once it finishes, you can disconnect the mounted ISO with this command:
    hdiutil unmount /Volumes/ESD-ISO

  5. Now you should be able to boot from the USB to install Windows 10 on your Mac or Windows machine.

Conclusion

These should be the easiest ways to create a Windows 10 bootable USB from ISO on Mac, without using Boot Camp Assistant. No matter which method you prefer, be sure that you backup any important data on your USB drive, as the procedure of creating bootable USB will delete everything on it.

Related posts:


If you have serious issues with your PC and can’t fully boot into Windows 10, you must either repair or reinstall the operating system to get things working again. You need a bootable Windows 10 USB stick for that, and using another PC is the best way to create one from scratch.

But what if you only have a Mac at hand? As you may’ve already found out, Microsoft’s Media Creation Tool does not work on macOS.

In that case, the best way to create a Windows 10 bootable USB for Mac is to manually format a flash drive and copy the relevant files into it using the Mac’s Terminal. There’s a storage-related factor at play, so the entire process can end up being somewhat complicated.

What You Need to Create a Bootable Windows 10 USB on Mac

To get started, you must have an ISO image of Windows 10 on your Mac. It’s a file that contains all the stuff that goes into the bootable Windows 10 USB stick that you’re about to create. You can safely download the latest version of Windows 10 by heading over to Microsoft’s Download Windows 10 page using Safari or a third-party web browser.

Can You Create A Windows Bootable Usb On Mac

You must also have a USB stick with at least 8GB of storage space. You will lose all data on the drive, so do be sure to back up any important files inside it before you go ahead.

Additionally, you must install HomeBrew on your Mac. It’s an open-source software package manager that you must then use to add a command line tool called wimlib. But why?

Newer Windows 10 ISO images contain a file called “install.wim” that weighs in at over four gigabytes. The FAT32 storage format—which is the only format that Windows and macOS has in common—has a file size limitation of 4GB. With wimlib, you can get around the limitation by splitting or compressing the “install.wim” file.

Tip: To check the size of the “install.wim” file, mount the ISO image (just double-click it), open the Sources folder on the pop-up window, select install.wim, and press Space.

If you have an older ISO image of Windows 10 (such as Windows 10 version 1903 or earlier), it may have an “install.wim” file under 4GB. In that case, you don’t have to install HomeBrew and wimlib since you can copy the file to the USB stick normally.

However, Microsoft does not make older versions of Windows 10 available for download in ISO format. If you do have a copy lying around, feel free to use it.

Give the Boot Camp Assistant a Try First

Before you go ahead, you may want to give the Mac’s Boot Camp Assistant a try first. It comes with an option to create bootable Windows 10 USB drives on a few Mac models, but it usually ends up running into issues while formatting or copying files to the flash drive. It’s still worth a shot, though.

Note: You can’t use Boot Camp Assistant on Mac’s with Apple M1 chipsets.

1. Go to Finder > Applications > Utilities and launch Boot Camp Assistant.

2. Select Continue on the Introduction screen.

3. Check the box next to Create a Windows 10 or later install disk. Then, uncheck the box next to Install Windows 10 or later version and select Continue.

4. Select the Windows 10 ISO image from your Mac’s internal storage and select Continue.

5. Wait until the Boot Camp Assistant finishes creating the bootable Windows 10 USB. Then, unmount the flash drive (right-click and select Eject) from the desktop.

Continue reading and use the Mac’s Terminal instead if you run into any of the problems below:

  • The Create a Windows 10 or later install disk option is missing.
  • You get An error occurred while formatting the disk message.
  • You get a There is not enough space available on the disk message.
  • You can’t use the USB stick to boot into a PC.

Install HomeBrew and wimlib on the Mac

Install HomeBrew and wimlib on your Mac by running the following commands in the Mac’s Terminal. If you plan to use an older Windows 10 ISO file with an “install.wim” file under 4GB, skip ahead to the next section.

1. Go to Finder > Applications and launch Terminal.

Create Mac Bootable Usb From Windows Madwithmac

2. Copy and paste the following command and press Enter.

/bin/bash -c “$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install.sh)”

Type in your Mac user password and press Enter again to install HomeBrew. It may take several minutes.

3. Type brew install wimlib and press Enter to install wimlib.

Create a Windows 10 Bootable USB With Terminal

Once you’ve finished installing HomeBrew and wimlib, use the steps that follow to create the bootable Windows 10 USB on your Mac. If you chose not to install them, then use the alternative command in step 7 and skip step 8.

1. Connect the USB stick to your Mac.

2. Open Terminal.

3. Type diskutil list and press Enter to bring up a list of all drives on your Mac.

4. Note down the USB stick’s disk identifier—disk2, disk3, disk4, etc. It should appear to the left of (external, physical).

If you have multiple external drives attached, use the SIZE column to identify the USB stick.

5. Substitute the disk identifier (disk2) at the end of the command below and use it to format the flash drive.

diskutil eraseDisk MS-DOS “WINDOWS10” MBR /dev/disk2

Note: If you run into issues later while setting up Windows 10 on a drive with a GPT (GUID Partition Table) partition scheme, use the following command instead to format the USB stick and go through the rest of the steps again.

diskutil eraseDisk MS-DOS “WINDOWS10” GPT /dev/disk2

6. Mount the ISO from the Downloads folder of your Mac. Make sure to substitute the file name of the ISO image—including its file path—in the command below as needed.

hdiutil mount ~/Downloads/Win10_20H2_v2_English_x64.iso

7. Copy the contents of the ISO image—excluding the “install.wim” file—into the USB stick with the command below.

rsync -vha –exclude=sources/install.wim /Volumes/CCCOMA_X64FRE_EN-US_DV9/* /Volumes/WINDOWS10

Create Mac Bootable Usb From Windows Madwithmac

If you mounted an ISO image with an “install.wim” file that doesn’t exceed 4GB, use the following command instead to copy all the contents to the flash drive. Also, skip the next step.

rsync -vha /Volumes/CCCOMA_X64FRE_EN-US_DV9/* /Volumes/WINDOWS10

8. Use the following command to split and copy the install.wim file to the USB stick.

wimlib-imagex split /Volumes/CCCOMA_X64FRE_EN-US_DV9/sources/install.wim /Volumes/WINDOWS10/sources/install.swm 3000

Alternatively, you can use the two commands below to compress and copy the install.wim file to the drive. However, this method can take a lot of time (up to an hour) to complete.

sudo wimlib-imagex optimize install.wim –solid

cp install.wim /Volumes/WINDOWS10/sources/install.wim

Create Mac Bootable Usb From Windows Madwithmac File

9. After Terminal finishes copying all files, unmount the USB from the desktop or use the following command (replace with correct disk identifier) instead.

diskutil unmountDisk /dev/disk2

You can now disconnect the USB drive and use it to boot into your PC. Do remember to change the boot order if you haven’t done that already already. The USB stick should also function as a bootable device on your Mac.

Boot into Your Computer and Start Repairing

Mac Bootable Usb Creation Tool

Did you manage to boot into your computer with the USB stick? You probably did. If not, it’s likely that your PC uses the much older BIOS (Basic Input/Output System) instead of UEFI (Unified Extensible Firmware Interface). Your best bet then is to install Windows 10 onto your Mac itself and use Microsoft’s Media Creation Tool or a third-party utility such as Rufus to create a compatible bootable Windows 10 USB stick.