Language: English, Français,Deutsch, 日本語

Step 3: Rufus will automatically identify USB device which has been connected the computer. If users can't find the desired USB drive, please try using another USB device or another USB port. If you have more than one USB drive connected, choose the one you prefer. Then select the MiniTool ISO file to create a bootable disc. Finally, click 'Start'. If you want to use your USB stick with an Apple Mac, you will need to restart or power-on the Mac with the USB stick inserted while the Option/alt (⌥) key is pressed. This will launch Apple’s ‘Startup Manager’ which shows bootable devices connected to the machine. The blog highlighted the need for recovery drive, steps to create a bootable USB flash drive, and usage of the drive for installing the new macOS Mojave 10.14 in one or multiple computers. The drive acts as an external recovery drive in case your Mac fails to boot. Plug in the USB flash drive or formatted volume you’re using for the bootable install disk. For this article, I used a 2TB USB hard disk drive erased and formatted as Mac OS Extended and given the name Installer. Find the Terminal app in the Utilities folder of your Applications folder.

Select the version of Windows that is closest to the version of Windows installed on the Mac (Windows 8, Windows 10). It does not matter what edition of Windows is used, since Windows is not going to be installed. Create Recovery USB Flash Drive. To create the USB Flash drive, follow these steps: Mount the Windows ISO downloaded from Microsoft.

Tip: MiniTool Bootable Media Builder is available on all registered editions of MiniTool software. For those who are using the Free Edition and Trail Edition, please upgrade to Paid Editions before accessing.

Part 1 - Build a Bootable MiniTool USB Flash Drive

Recommended USB drive size: 4 GB - 64 GB

Note: MiniTool Bootable Media Builder will format the USB flash drive while building MiniTool Boot Flash Drive. Please make sure that the USB flash drive can be formatted.

Step 1. Prepare a USB flash drive and connect it to computer.

Step 2. Launch 'Bootable Media Builder' from MiniTool software to the main interface.

Step 3. Select 'WinPE-based media with MiniTool plug-in' to continue.

Step 4. To build a Boot Flash Drive, please check 'USB Flash Drive' option and select the correct USB flash drive if there are many. Then click 'Yes' to confirm that you want to burn the boot flash drive.

Step 5. Please wait patiently while MiniTool Bootable Media Builder is generating boot files on the flash drive. Finally, click 'Finish' after successful burning.

Part 2 - Create a MiniTool Bootable CD/DVD

Note: MiniTool Bootable Media Builder will format the CD/DVD discs while building MiniTool Boot CD/DVD Disc. Please make sure that the disc can be formatted.

Step 1. Prepare a recordable CD/DVD disc and insert it into your CD/DVD burner.

Step 2. Launch 'Bootable Media Builder' from MiniTool software to the main interface.

Step 3. Select 'WinPE-based media with MiniTool plug-in' to continue

Step 4. To build a Boot CD/DVD Disc, please check 'CD/DVD Writer' option and select the correct CD/DVD if there are many. Then click 'Yes' to confirm that you want to burn the CD/DVD.

Step 5. Please wait patiently while MiniTool Bootable Media Builder is generating boot files on the CD/DVD disc. Finally, click 'Finish' after successful burning.

Part 3 - Burn the ISO File to USB Using 3rd Party Tool

MiniTool Partition Wizard Bootable Media also helps users to extract the ISO file. This is very useful when users have difficult in burning the bootable USB flash drive or CD/DVD disk directly from the media builder. But to use this bootable program, users need to do the following 2 things at first:

  1. Download ISO file.
  2. Burn the ISO file to a USB drive (or CD/DVD disc).

How to Burn MiniTool ISO to USB Flash Drive

To burn the ISO to USB drive, users need to download an excellent ISO burning software at first. Currently, there is much free ISO burning software available, but here we just take Rufus for example.

Step 1: Download Rufus from its official site. It is a portable program so no need to install.

Create

Step 2: Insert the USB drive to computer, and then run Rufus.

Note:
  1. It’s recommended to copy all data on the USB drive since burning an ISO image will erase everything on the drive!
  2. Users don’t need to change the Partition scheme and target system type, File system, cluster size and New volume label.

Step 3: Rufus will automatically identify USB device which has been connected the computer. If users can't find the desired USB drive, please try using another USB device or another USB port. If you have more than one USB drive connected, choose the one you prefer. Then select the MiniTool ISO file to create a bootable disc. Finally, click 'Start'.

when you see the Ready bar reaches to 100%, all is done.

How to Burn MiniTool ISO to CD/DVD

Although Rufus can help to easily burn an ISO file to USB hard drive, it doesn’t support CD/DVD burning. If users want to burn ISO file to CD/DVD disc, they need to download other burning programs, and here we take UltraISO for example.

Step 1: Insert the CD or DVD disc to computer and run ULtraISO. Here, users had better insert a blank CD/DVD disc, because the original data could be overwritten.

Step 2: From the menu bar, select 'Burn CD/DVD Image'. In the new window, select the CD/DVD disk and the MiniTool ISO file. Finally, click 'Burn'.

Thus, all work has been done. And, users have finished burning MiniTool ISO file to USB drive. After that, they can boot computer from the burned MiniTool bootable flash drive.

If you have serious issues with your PC and can’t fully boot into Windows 10, you must either repair or reinstall the operating system to get things working again. You need a bootable Windows 10 USB stick for that, and using another PC is the best way to create one from scratch.

But what if you only have a Mac at hand? As you may’ve already found out, Microsoft’s Media Creation Tool does not work on macOS.

In that case, the best way to create a Windows 10 bootable USB for Mac is to manually format a flash drive and copy the relevant files into it using the Mac’s Terminal. There’s a storage-related factor at play, so the entire process can end up being somewhat complicated.

What You Need to Create a Bootable Windows 10 USB on Mac

To get started, you must have an ISO image of Windows 10 on your Mac. It’s a file that contains all the stuff that goes into the bootable Windows 10 USB stick that you’re about to create. You can safely download the latest version of Windows 10 by heading over to Microsoft’s Download Windows 10 page using Safari or a third-party web browser.

You must also have a USB stick with at least 8GB of storage space. You will lose all data on the drive, so do be sure to back up any important files inside it before you go ahead.

Additionally, you must install HomeBrew on your Mac. It’s an open-source software package manager that you must then use to add a command line tool called wimlib. But why?

Newer Windows 10 ISO images contain a file called “install.wim” that weighs in at over four gigabytes. The FAT32 storage format—which is the only format that Windows and macOS has in common—has a file size limitation of 4GB. With wimlib, you can get around the limitation by splitting or compressing the “install.wim” file.

Tip: To check the size of the “install.wim” file, mount the ISO image (just double-click it), open the Sources folder on the pop-up window, select install.wim, and press Space.

If you have an older ISO image of Windows 10 (such as Windows 10 version 1903 or earlier), it may have an “install.wim” file under 4GB. In that case, you don’t have to install HomeBrew and wimlib since you can copy the file to the USB stick normally.

However, Microsoft does not make older versions of Windows 10 available for download in ISO format. If you do have a copy lying around, feel free to use it.

Give the Boot Camp Assistant a Try First

Before you go ahead, you may want to give the Mac’s Boot Camp Assistant a try first. It comes with an option to create bootable Windows 10 USB drives on a few Mac models, but it usually ends up running into issues while formatting or copying files to the flash drive. It’s still worth a shot, though.

Note: You can’t use Boot Camp Assistant on Mac’s with Apple M1 chipsets.

1. Go to Finder > Applications > Utilities and launch Boot Camp Assistant.

2. Select Continue on the Introduction screen.

3. Check the box next to Create a Windows 10 or later install disk. Then, uncheck the box next to Install Windows 10 or later version and select Continue.

4. Select the Windows 10 ISO image from your Mac’s internal storage and select Continue.

5. Wait until the Boot Camp Assistant finishes creating the bootable Windows 10 USB. Then, unmount the flash drive (right-click and select Eject) from the desktop.

Continue reading and use the Mac’s Terminal instead if you run into any of the problems below:

  • The Create a Windows 10 or later install disk option is missing.
  • You get An error occurred while formatting the disk message.
  • You get a There is not enough space available on the disk message.
  • You can’t use the USB stick to boot into a PC.

Install HomeBrew and wimlib on the Mac

Install HomeBrew and wimlib on your Mac by running the following commands in the Mac’s Terminal. If you plan to use an older Windows 10 ISO file with an “install.wim” file under 4GB, skip ahead to the next section.

1. Go to Finder > Applications and launch Terminal.

2. Copy and paste the following command and press Enter.

/bin/bash -c “$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install.sh)”

Type in your Mac user password and press Enter again to install HomeBrew. It may take several minutes.

3. Type brew install wimlib and press Enter to install wimlib.

Create a Windows 10 Bootable USB With Terminal

Once you’ve finished installing HomeBrew and wimlib, use the steps that follow to create the bootable Windows 10 USB on your Mac. If you chose not to install them, then use the alternative command in step 7 and skip step 8.

1. Connect the USB stick to your Mac.

2. Open Terminal.

3. Type diskutil list and press Enter to bring up a list of all drives on your Mac.

4. Note down the USB stick’s disk identifier—disk2, disk3, disk4, etc. It should appear to the left of (external, physical).

If you have multiple external drives attached, use the SIZE column to identify the USB stick.

5. Substitute the disk identifier (disk2) at the end of the command below and use it to format the flash drive.

diskutil eraseDisk MS-DOS “WINDOWS10” MBR /dev/disk2

Note: If you run into issues later while setting up Windows 10 on a drive with a GPT (GUID Partition Table) partition scheme, use the following command instead to format the USB stick and go through the rest of the steps again.

diskutil eraseDisk MS-DOS “WINDOWS10” GPT /dev/disk2

Create Recovery Usb Windows 10

6. Mount the ISO from the Downloads folder of your Mac. Make sure to substitute the file name of the ISO image—including its file path—in the command below as needed.

hdiutil mount ~/Downloads/Win10_20H2_v2_English_x64.iso

7. Copy the contents of the ISO image—excluding the “install.wim” file—into the USB stick with the command below.

rsync -vha –exclude=sources/install.wim /Volumes/CCCOMA_X64FRE_EN-US_DV9/* /Volumes/WINDOWS10

Create Recovery Usb Macos Catalina

If you mounted an ISO image with an “install.wim” file that doesn’t exceed 4GB, use the following command instead to copy all the contents to the flash drive. Also, skip the next step.

rsync -vha /Volumes/CCCOMA_X64FRE_EN-US_DV9/* /Volumes/WINDOWS10

8. Use the following command to split and copy the install.wim file to the USB stick.

wimlib-imagex split /Volumes/CCCOMA_X64FRE_EN-US_DV9/sources/install.wim /Volumes/WINDOWS10/sources/install.swm 3000

Alternatively, you can use the two commands below to compress and copy the install.wim file to the drive. However, this method can take a lot of time (up to an hour) to complete.

sudo wimlib-imagex optimize install.wim –solid

cp install.wim /Volumes/WINDOWS10/sources/install.wim

9. After Terminal finishes copying all files, unmount the USB from the desktop or use the following command (replace with correct disk identifier) instead.

Create Recovery Usb Mac Os

diskutil unmountDisk /dev/disk2

You can now disconnect the USB drive and use it to boot into your PC. Do remember to change the boot order if you haven’t done that already already. The USB stick should also function as a bootable device on your Mac.

Boot into Your Computer and Start Repairing

Create Recovery Usb Mac Windows 10

Did you manage to boot into your computer with the USB stick? You probably did. If not, it’s likely that your PC uses the much older BIOS (Basic Input/Output System) instead of UEFI (Unified Extensible Firmware Interface). Your best bet then is to install Windows 10 onto your Mac itself and use Microsoft’s Media Creation Tool or a third-party utility such as Rufus to create a compatible bootable Windows 10 USB stick.