Apple is blocking Fortnite updates and new installs on the App Store, and has said they will terminate our ability to develop Fortnite for Apple devices. As a result, the Chapter 2 – Season 4. Waiting a week to download Apple's new iOS 15 operating system might save you a few headaches. 21, 2021 1:06 p.m. IOS 15 is on the way, but you might not want to install. MacOS 10.14 Mojave is the best Mac operating system yet – but it’s not without its problems. Read on to find common macOS 10.14 problems and how to fix them. Macbook Air (2015) Not Recognizing New Updates. Hello, for some reason, my macbook ' (13-inch, Early 2015) is still on Sierra (10.12.6) and isn't installing (or acknowledging) any of the new systems (High Sierra, Mojave, Big Sur). I've tried going to App Store and 'About My Mac' section to check for new software updates, but nothing shows up. When you're installing updates on your Mac, research the update version to make sure it's a good one. For instance, if you have 10.12.2 (macOS Sierra) or 10.13.1 (macOS High Sierra), your computer isn't going to run well. However, if you have 10.12.5 or 10.13.6, you'll be fine.

For some, it’s the MacBook keyboard that’s not working; for others, it’s the trackpad that’s acting up. For a worrying number of people, the issue is with both. Worse still, the problem doesn’t seem to be affecting a particular type of MacBook but both Pro and Air models from 2011 onwards.

See what’s draining your battery, find hidden files, and track tons of indicators that impact your Mac’s performance. It’s all on Setapp.

Download Free

Whether it’s one key or all of them, your MacBook is all but useless if the keyboard isn’t working. Here are a few things you can try to kick it back into life.

1. Clean the keyboard

That’s right. Cleaning is actually Apple’s recommended fix for unresponsive keyboards. To make this work, you’ll need a can of compressed air and a straw to control the airflow. If you have those things, here are Apple’s suggested steps:

  1. Hold your MacBook at a 75-degree angle.
  2. Use the compressed air to spray the keyboard in a left-to-right motion.
  3. Rotate your MacBook onto its right side and spray the keyboard again, from left to right.
  4. Repeat with the MacBook rotated to its left side.

At the very least, using compressed air rules out any crumbs or bits of debris being the cause of the Apple keyboard not working. Hopefully, though, it provides the fix you’ve been searching for.

2. Check for updates

Is your system up-to-date? It seems obvious, but there’s every chance that outdated firmware, drivers, or even the operating system affect the keyboard.

To check for updates, open the App Store and click on the Updates icon. If updates are available, click on the Update or Update All button to install them.

It’s worth having your Mac check for updates automatically. You can do this by going to the Apple menu > About This Mac > Software Update and checking the “Automatically keep my Mac up to date” box.

3. Delete recent apps

Is the problem a recent one? Has it occurred only after downloading a new app? It’s not unheard of for an app to cause conflict and knock other things out of sync. Try deleting recent apps to see if the keyboard regains proper function. If it’s doesn’t work, you can easily reinstall them.

You can delete applications manually in one of two ways: using the Launchpad and the Finder.

Deleting apps using the Launchpad

  1. Click on the Launchpad icon.
  2. Position the pointer over the app you want to get rid of and press and hold until all the icons start to jiggle.
  3. Hit the Delete button.

Deleting apps using the Finder

  1. In the Finder, click on Applications.
  2. Find the app that you want to delete and drag it from the Applications folder to the Trash.
  3. Open Trash > Empty to permanently remove the app.

Deleting apps with CleanMyMac X

Removing apps manually is quick and easy, but it’s not comprehensive. Traces of the app can be left behind in files. To fully remove any trace of the app, CleanMyMac X’s Uninstaller feature is the best solution.

  1. Download and launch CleanMyMac X (It’s free to download).
  2. Click on the Uninstaller tab.
  3. Click View All Applications.
  4. Check the box for any app that you want to remove.
  5. Click Uninstall.

It really is as simple as it sounds.

What to do if your MacBook trackpad is not working

The trackpad on MacBook is one of the best around, and it works brilliantly with macOS… When it actually is working, that is. If you’re having trackpad troubles, work your way through these possible fixes.

1. Reboot and close the lid

This one is a bit of a strange tip, but it’s worked for a few people. It’s basically the old “switch it off and back on again” fix that works for anything and everything.

  1. Reboot your MacBook from the Apple menu.
  2. Once rebooted, close the lid to put your MacBook to sleep and leave it for 2-3 minutes.
  3. Open the lid, and the trackpad should be working as normal.

This tip might also work for the keyboard, so give it a try if your keys aren’t working.

2. Disable Force Click

If a failure to register clicks is the problem for the trackpad not working on your Mac, you can disable Force Click.

  1. Go to System Preferences.
  2. Click on Trackpad and locate the Point & Click tab.
  3. Uncheck the 'Force Click and haptic feedback' option.
Macbook Not UpdatingMacbook not updating email

Note: this fix will only work on MacBooks that include 3D Touch.

3. Reset the Mac SMC

Resetting the System Management Controller (SMC) is a proven fix for all manner of hardware and power-related issues. How you do this depends on whether or not your MacBook has a detachable battery.

Resetting the SMC on Macs with non-removable batteries:

  1. Shut down your MacBook.
  2. Hold down Shift-Control-Option.
  3. Keep holding all three keys for 7 seconds. Then, press and hold the Power button as well.
  4. Hold all four keys for 7-10 seconds.
  5. Release the keys.
  6. Reboot your Mac and test the trackpad.

Resetting the SMC on Macs with removable batteries:

  1. Shut down your Mac.
  2. Remove the battery
  3. Press the Power button and hold it for 5 seconds.
  4. Reinstall the battery.
  5. Turn on your Mac.

Resetting the SMC on desktop Macs:

  1. Turn off your Mac and unplug the power cord.
  2. Wait 15 seconds, then plug the power cord back in.
  3. Wait 5 seconds, then start up your Mac.

Possible fixes if both MacBook trackpad and keyboard aren’t working

If both the keyboard and trackpad are not working, your MacBook is nothing more than a monitor, albeit a very pretty one. You can use a Bluetooth or wireless mouse or keyboard, but you could have just bought an iMac instead if you wanted to do that.

Here are some troubleshooting tips that have worked for dual keyboard and trackpad issues

1. Delete .plist files

Property List (plist) files are used to store user preference files related to software. Deleting them will reset your keyboard and trackpad back to factory settings. Before you go ahead and do this, you should back up your Mac using the Time Machine in case anything goes wrong.

  1. Press Command-Shift-G in the Finder.
  2. Enter ~/Library/Preferences/ and click Go.
  3. Locate the following files:
    • - Magic Trackpad
    • - Magic Mouse
    • - wired USB mouse
    • с
  4. Delete the files.
  5. Reboot your Mac.

2. Reset PRAM

Resetting Parameter RAM (PRAM) is similar to resetting the SMC in that it’s a good fix for a wide variety is issues.

  1. Fully shut down your MacBook.
  2. Reboot your Mac and press and hold Command-Option-P-R.
  3. Wait until you hear the reboot sound or when the Apple logo appears and disappears for the second time and release the keys.
  4. Let the system reboot normally.

3. Restore system to an earlier point

If problems with the keyboard and trackpad have recently appeared, you can restore your Mac to a previous date using the Time Machine. The issue could be due to a recent system change, and a restore can repair it.

This method will require you to have Time Machine set up to backup data to a storage device. We’ve written an article on how to do that here.

  1. Restart your Mac.
  2. When the system restarts, press Command-R to open the Recovery mode.
  3. Select Restore From Time Machine Backup. This will restore your Mac to 24 hours previous.

Each of these fixes has worked for one or more MacBook users, so it’s worth trying each one until you find the solution. Once you’ve found a fix, use CleanMyMac X regularly to maintain your system and prevent junk files from affecting keyboard and trackpad performance.

Stay in control of your Mac’s activity

If none of that works, your Mac will need a more comprehensive checkup. This is possible if you own a tool like iStat Menus. Basically, it’s an advanced Mac monitor that allows you to dive under the hood of your macOS. Using the app regularly is also a good way to prevent your keyboard and trackpad from misbehaving in the first place.

Macbook Not Updating Photos

iStat Menus lets you control CPU and memory load, disk usage, disk activity, fan sensors, battery life and cycles, weather, and so much more.

In case you want a simpler version of a monitoring tool, use One Switch. It’s a set of toggles available from the menu bar. Works perfectly for searching hidden files, enabling Sleep Time or Dark Mode, etc.

If the unthinkable happens and you’re still experiencing issues, you might need to contact Apple Support or visit an authorized service provider for repairs — but hopefully, that’s not the case.


For users who need to move from an old Mac to a new Mac, the best choice is to migrate over a wifi connection or wired connection using Migration Assistant. Unfortunately, not all users can complete the transfer job successfully.

User story - Apple Migration Assistant stuck at one minute

'I just purchased an iMac and was trying to migrate from my early 2011 MacBook Pro to the new machine, using Migration Assistant over wifi. But the migration has been stuck at 'Less than a minute remaining' since 8:00 PM yesterday. And until now, it has been in progress for about 15 hours. Is there any fix?'

Different Migration Assistant stuck scenarios

Just like the above case, there are always some users report that Migration Assistant stuck while starting up, at the end or midway with different messages saying 20+ hours remaining, less than a minute remaining, looking for source, looking for applications and documents to transfer, preparing transfer user documents or looking for other computers.

Simple steps to fix Migration Assistant stuck and frozen


If you have happened to encounter a similar situation where Migration Assistant stuck and stopped working, here are some troubleshooting steps that you can try to get rid of this issue.

Macbook Not Updating Time Zone

1. Try to use Target Disk Mode on the old Mac.

2. Unplug the ethernet cable from both machines and re-inserted it. Some users said the operation made the migration process resumed, re-synced, and finally completed.

3. Try to migrate everything except Applications, and then manually reinstall those you want on the new Mac.

4. Run a hardware diagnostics to check if there is a hardware issue on your Mac computer.

5. Try to migrate from a time machine backup if you have an available one.

Try reliable Migration Assistant alternative to fix stuck issue

Sometimes, you might fail to fix Migration Assistant stuck issue even after trying every possible solution. At this moment, we recommend you try EaseUS Mac backup software to manage the migration job from one Mac to another by disk cloning. It's an easy and practical approach to deal with Migration Assistant stuck problem.

Macbook Not Updating To Catalina 10.15.7

1. Connect the new Mac to the old machine and launch EaseUS Mac cloning software.

2. In the From drop-down list, select the old Mac disk that you want to clone.

3. In the To drop-down list, select the new Mac hard drive as the destination disk where you want to save the duplicate.

4. Set up the disk cloning properties. Here, you are allowed to exclude files or folders if necessary.

Macbook Not Updating Photos

5. Finally, click the Start button to execute the cloning operation.