Answer (1 of 2): I recommend keeping the newest operating system. El Capitan is approaching the drop date and software will stop supporting it within the next few years. MacBook Pro 13', macOS 10.13 Posted on Nov 24, 2019 12:10 PM Reply I have this question too (241) I have this. Updating High Sierra to Catalina More Less.

MacBook Pro (2018 or later) MacBook Air (2018 or later) iMac Pro (2017 or later) Dictation, Voice Control, and Voice Memos. Requires a microphone (built-in or external). Spotlight Suggestions. Requires a broadband internet connection. Requires a Multi-Touch trackpad, Force Touch trackpad, Magic Trackpad, or Magic Mouse. This usually occurs on machines that support High Sierra (macOS 10.13) natively, but whose owners have not installed High Sierra on them previously. Installing High Sierra on these machines will update the machine's system firmware, allowing it to boot from an APFS volume. This is necessary in order to boot Catalina. Make sure you have a backup of any important information on your Mac as this will erase the entire hard drive. Make sure you have a backup of the backup, just in case.

This page covers 5 fixes for Mac won't boot or start issue after macOS Big Sur, Catalina, Sierra or older macOS update issue. If you are with this issue, follow to make your Mac computer work now:

Macbook Pro High Sierra Download

Workable SolutionsStep-by-step Troubleshooting
Fix 1. Fix PRAM/NVRAMRestart Mac > Hold Command+Option+P+R keys to turn on Mac...Full steps
Fix 2. Reset SMCShut down Mac > Unplug all cables > Plug in cables back after a few minutes...Full steps
Fix 3. Boot in Safe ModeStart Mac > Hold 'Shift' until the login window appears > Release the key when login in window appears...Full steps
Fix 4. Run Disk UtilityTurn of Mac > Hold Command + R keys and power Mac back up > Enter recovery mode...Full steps
Fix 5. Reinstall macOSDownload macOS Catalina, Mojave, or Sierra > Create bootable USB > Clean install macOS...Full steps

macOS has now been updated to 11.0, and many Mac users are trying to upgrade to the newest version. While for most it's a usual pleasurable experience, for some this update had downsides. Some users complain that their Mac computers won't boot after installing new macOS Big Sur/Catalina. When Mac fails, it usually can't boot or start up properly. If you are faced with this situation, the most important thing should be recovering data from the unbootable Mac because:

  • Your attempts to fix the Mac not booting issue may write new data on this Mac, which will overwrite the old data and make it irrecoverable.
  • Recovering data before the complex fixes can avoid data loss.

EaseUS Mac data recovery software is able to recover data from unbootable Macs after update. It creates a bootable media that enables you to recover data from Mac hard drive (If you only have one Mac). What's more, it recovers data from failed internal Mac hard drive, APFS boot drive, and unmountable APFS boot volume, etc. If you have two Mac devices, take out the hard drive and connect it to the other Mac. Download EaseUS Data Recovery Wizard for Mac on that Mac device, and recover data from the hard drive.

Then, you can read on and Fix the 'Mac won't boot after update' issue after you have successfully got data from the drive.

1. Reset the PRAM / NVRAM

NVRAM refers to special memory sections on your Mac that store data that persists even when the Mac is shut off, such as volume settings and screen resolution. Resetting that data isn't harmful! In some cases, after performing this step, your Mac will restart normally.

  • Restart your Mac
  • Hold down all of these keys: 'Command', 'Option', 'P' and 'R', and turn on the Mac. (It's the same keys to reset the PRAM).
  • Keep holding the keys down until you hear the Mac restart again.

You may see a progress bar on startup. If the progress bar fills up and then the Mac starts up, you're probably good to go. If not, reset SMC.

2. Reset the SMC

Macbook Pro High Sierra To Catalina Drive

Macbook pro high sierra to catalina upgrade

Macbook Pro 2012 High Sierra Vs Catalina

In some situations, you may need to reset your Mac's SMC (System Management Controller).

  • Shut the Mac down.
  • Unplug all cables.
  • Wait for a few minutes.
  • Plug the cables back in and start up the Mac.

If you've got a Mac desktop, unplug it for 15 seconds and then plug it in and after five seconds press the power button.

3. Boot Mac in Safe Mode

Safe Mode is a stripped-down version of the Mac operating system that can be useful if you are trying to troubleshoot issues with your Mac.

  • Start your Mac, press and hold the 'Shift' key, and make sure your Mac has at least 9 GB of free space.
  • When the login window appears to release the shift key and log in. You may be required to log in twice if you have FileVault turned on. Then restart the device.

Wait patiently till Mac computer finish the reboot process.

4. Run Disk Utility in Recovery Mode

If your Mac is booting but the operating system isn't loading up, you may have a corrupted drive. Luckily it is possible to fix this in Recovery Mode. In Recovery Mode you can restore from a Time Machine backup, use Disk Utility to verify and repair connected drives, check your internet connection, get help online using Safari, and install or reinstall macOS.

  • Make sure the Mac is off. If it's stuck on a grey, blue or white screen, just hold down Mac's power button for several seconds until it shuts off.
  • Hold down the 'Command' and 'R' keys, and power the Mac back up again. Keep pressing 'Cmd' + 'R' while your Mac is booting up.
  • Once your Mac starts in Recovery Mode you can have access to 'Utilities'. Click 'Disk Utility', locate the icon for your Mac's drive, and click 'Verify Disk'.

5. Reinstall macOS Big Sur/Catalina/Sierra

The last method to fix macOS Big Sur, Catalina or Sierra fails to boot after update error is to reinstall macOS.

  • You can download wanted macOS Big Sur/Catalina/Sierra and create a bootable USB drive to clean install macOS Big Sur/Catalina/Sierra on your computer again.
  • You can also boot into Recovery mode (Solution 4), and then click to install the latest OS and follow the onscreen prompts. Our article on resetting a Mac to factory settings has more information on reinstalling macOS.

If your Mac does not respond after trying these tips, contact Apple Support or a certified Apple Repair Center. It’s likely there is a problem with your logic board or other internal hardware.