Enough mountain climbing, it's time for desert heat! Recently, Apple has taken Mac users to the warmer places by killing its series of mountain themes and naming the newest macOS version after Mojave desert.
Jul 23, 2019 macOS Mojave. Version 10.14.6: Note: Mojave Security Update 2020-002 (70.5 MB) Addresses an issue which prevents creation of a new Boot Camp partition on iMac and Mac mini with Fusion Drive. Resolves an issue that may cause a hang during a restart. Resolves a graphics issue that may occur when waking from sleep. Security Update 2020-005 was also re-released. Apple has just released a Mojave Supplemental Update that address all the problems that the previous Safari 14.0 and 2020-005 Security Updates! This news comes one day after Apple pulled both software updates from the software update catalog. You can find a full summary of the issue in the link below.
Apart from the new name and appearance (which, by the way, can be changed), macOS 10.14 is packed with lots of goodies that should give your Mac a performance boost. Dark Mode, Stacks, Continuity Camera – these are only some of the awesome improvements you'll find in macOS Mojave, which is now available as a free update in the Mac App Store.
From preparing your Mac for the update to the moment you can start enjoying the blackness of the Dark Mode, it should take you less than two hours to make the install. But not everything is lightning fast in macOS 10.14. As it often happens with new updates, you may find yourself falling asleep in the attempt to open an app on your Mac.
Online forums and communities are buzzing with discussions, which all reflect upon the same issue – Mojave freezing or running extremely slow. Clearly, the new OS hampering your Mac's performance is simply not fun. But hey, we are all a little slow when it comes to doing something new.
Prior to making any conclusions and cursing at Mojave, try to get to the root of the problem. Here's the list of major reasons why an upgrade to macOS Mojave is impossible or leaves you with a slow Mac:
If your Mac runs slow on Mojave, this guide should help you get things right. Check out the most common problems with macOS 10.14 performance to ensure none of that is affecting your Mac.
Speed up your Mac with Setapp
Get a huge pack of top apps to improve macOS performance. Best utilities in one pack, give it a go!
Did you recieve the error messages when trying to download Mojave? It's possible your Mac simply won't download the macOS 10.14 Mojave installer and shows error messages like 'macOS Mojave download has failed' or 'try again later.' Re-downloading Mojave over and over again won't always help and, besides, could be quite irritating.
What could be wrong?
Mojave won't download for a variety of reasons. It could be that too many people are trying to download it at the same time. Poor internet connectivity is another possible cause. Lastly, the download will fail in case there's not enough storage space on you Mac.
That being said, there are three fixes one of which should apply to your download problem:
Why does Mojave fail to install? What to do if your Mac freezes during software installation? In this case, you'll most likely see the message like 'Installation of macOS couldn't continue.'
What could be wrong?
The model of your device is incompatible with the macOS Mojave, or there's less than 4 GB of RAM and/or less than 15 GB of free disk space.
You need to have a supported Mac version. That's the rule number one and if you fail to follow it, you simply won't get to experience Mojave perks. Seems like a no-brainer, but compliance is the first thing you should check.
As a rule of thumb, all the Macs released before 2012 are incompatible with macOS 10.14. These oldies simply don't have the required graphics power and are technically not fit for the newest macOS. So, if your Mac is older than 6 years, sorry – you won't be able to enjoy the darkness of Mojave.
If you're using a supported Mac version, check RAM and available storage:
Apple menu > About This Mac > Overview (for RAM) / Storage (for free disk space).
As necessary, you'll need to buy some extra RAM and / or reclaim more storage – easy to do with CleanMyMac X. On any Mac, there's a whole bunch of outdated cache files, app leftovers and logs, eating up a large amount of disk space.
Ideally, before you upgrade to the new macOS, you should clear up all system junk on your Mac. There are two ways to empty the caches: manually – by deleting file by file, or with just a few clicks – through a cleaning software like CleanMyMac. This app can remove all the junk from every corner of your hard drive. What's more, you can pick specific kinds of material that should be cleared away: mail attachments, photo junk, useless old downloads, etc. The whole process is really a three-click deal.
To delete junk files in seconds use CleanMyMac X:
You know what hurts the most? When the installation is almost finished and your Mac, suddenly, gets stuck on the message 'About a minute remaining.'
What could be wrong
Most likely, Mojave won't install on your Mac, because you've been using an older version of OS.
You'll need to update your OS to the newest version available and then switch to Mojave. For instance, if you've been using macOS Sierra 10.12.4, try upgrading to Sierra 10.12.6 before you update your Mac to macOS 10.14.
When things go wrong right from the start, that's frustrating. Slow macOS startup is the common problem for those making acquaintance with macOS 10.14. For sure, if you have to spend over two minutes on booting your Mac, productive work is out of the question. But don't rush into downgrading – one quick-fix solution can give your Mac blazing speed.
What could be wrong
There could be different reasons why your Mac is running slow on startup. If you think you're waiting too long, one of the following could be the issue:
Unless you're a slow life fan, all of these issues with startup speed should be fixed. The good news is, if you know where to look, that's quite easy.
Unnecessary apps running at the background when you try to login or boot the Mac can be root of all problems. Because there are many auto-run programs that launch automatically during startup, your Mac is under pressure here. Not only is it booting your OS, but a range of other programs – most of which you don't need – as well. Obviously, this makes your Mac stop or delay while starting up.
To prevent programs from starting automatically just disable them:
While closing auto-runs seems easy-peasy, it's a bit more tricky with hidden items. There are some small satellite apps or other software products that will launch each time you're trying to boot the Mac, but won't show themselves. These hidden launch agents may cause your Mac slow down significantly, although everything seems fine on the surface.
With CleanMyMac X, you get rid of hidden junk in a matter of seconds:
A full (or almost full) startup disk may be another reason why your Mac isn't running at full speed after the update. For sure, without solving the 'startup disk full' problem, you can't fix slow Mojave. To free up as much disk space as possible, you can either go for a long-term solution – CleanMyMac X is tidying up your disk automatically – or make a range of quick fixes:
In case you're using an oldie – a device equipped with Fusion drives or HDD – no wonder it's taking forever to startup. To expand storage and add some serious speed, switch to a SSD and see how it gives your Mac better performance and durability.
Your new OS isn't able to run all apps at full speed – that's a pretty common problem.
What could be wrong?
The apps you have in your Mac should also be compatible with Mojave, so that they don't slow down the overall performance. On top of that, power-hungry apps could also cause problems with speed.
Mojave fixes in a single pack
Here's all you need to keep your macOS in a good shape. Grab the best utilities to fix Mojave problems.
If you're using Setapp, you don't have to care, because all the updates are made automatically, by default. In other cases, you'll have to ensure third-party apps are compatible with Mojave: Go to the Mac App Store, click on Updates and you'll see all apps that are available for update at the moment. If there are more than one, just click Update All and you won't have to bother anymore.
Power-hungry apps running in the background can be another reason attributed to slow Mac performance. Because too much RAM and CPU is occupied by these apps, there's little left to Mojave. If that's the case, Activity Monitor is your key to solving the problem here.
Here's a quick primer on how to stop resource-hungry apps from slowing down your Mac:
In case you want to close all the apps, you can click Quit or Force Quit. Choose the first option to save changes before closing the apps (could take a while), or shut down all apps through Force Quit if you don't care about the unsaved changes.
On top of Mojave running slow, users often experience battery drain problems after the update.
What could be wrong?
The new Dynamic Desktop feature, as well as improved display effects, affect Mac's performance.
The 'dark-light-dark-repeat' mode is fun – no question. And while the new macOS 10.14 is packed with lots of useful features, Dynamic Desktop is, probably, the most lightweight yet most exciting of all. In case you didn't know, this is the feature that makes your desktop change from dark to light mode, depending on the time of the day. Sadly, Dynamic Desktop can also be the reason why Mojave runs slow.
Another problem relates to improved display effects like transparency and motion. For sure, Mojave became not only the most solid, but also the most visually-pleasing OS. But that which glitters is not always gold, right? Fancy display effects exhaust your Mac, which, eventually, causes slow performance in Mojave.
Below are the simple steps to disable Dynamic Desktop on your Mac:
If speed is your priority, you can change display settings in a few steps:
Apart from what was mentioned, slow performance can also be caused by malware or hardware problems.
Here are the last-resort measures that could help you solve the problem.
System Management Controller (SMC) and PRAM are two powerful mechanisms, governing a range of functions on your Mac – from battery management to screen resolutions. Basically, anytime when your Mac is behaving strangely, resetting SMC and PRAM could be a good idea.
To reset SMC:
To reset PRAM:
There's another ridiculously simple solution: reinstall the macOS. There are two ways to give Mojave a fresh start:
Although the latter will fully erase your startup disk and you'll have to reinstall the apps, it's usually much more efficient.
In case Mojave won't speed up, the good idea is to scan your Mac for malware. Use the tools like MalwareBytes for Mac or run a one-click scan with Malware Removal available on CleanMyMac X.
As you see, many perks that you gain with Mojave come at the expense of dealing with slow Mac performance issues. The good news is you can solve all of them.
There are many users who, amazed by Dark mode and other Mojave goodies, rushed into the new system unprepared. And it's very likely that most of them have already rolled back to High Sierra. While each OS has its pros and cons, we recommend you fully experience the capabilities of Mojave, which could only be possible if your Mac is ready for the update.
First of all, check device compatibility – not every Mac model is fit for the newest version of macOS. Clean up your hard drive, deleting all old files, app leftovers, and downloads to make enough room for Mojave. Lastly, perform a system backup to ensure no important files will get lost in the shuffle after the update. You can set up the backup process, using Time Machine, or choose a third-party app called Get Backup Pro – an awesome utility with four different backup modules: simple copy, clone, incremental, and versioned.
You know what they say – failing to plan is planning to fail. So before you give up on the new macOS 10.14, ensure your Mac is really in a good shape for the update. After all, poor preparation of your device could be the key reason of slow performance.
Mojave has excellent tools that could skyrocket productivity and organisation for Mac users. Using all the tips above should help you make the most of the new macOS – lightning fast. Setapp has you covered with a range of apps, making your Mac run at full speed after the update – including CleanMyMac X, Get Backup Pro, and Spotless mentioned in this article.